Fork Re-Valve and Top End Time

Pulled the forks apart and reshuffled the compression shim stack in an effort to make the forks more compliant over roots and doll-head rocks. Also checked the compression – not that I thought anything was wrong, but just out of curiosity – and it was w-a-y down. Pulled the cylinder/piston and started measuring. Piston and rings are both shot, cylinder is worn pretty heavily but can probably take an oversize piston. Parts on order…

Can’t believe it ran as well as it did, but maybe this’ll explain the hard starting.

-B

First Ride At NCMP

Wow….I knew there’d be some rust, but this felt like I’d never ridden before. It was a really odd and unsettling afternoon, even the simple act of balancing the bike required thought. Rode around the parking lots for a bit to get familiar with the feel of the bike, positioning of the shifter and rear brake levers, and to see what, if anything, would need to be adjusted (bars/levers/etc…). After twenty or so minutes of this, it was time to hit the woods.

I hadn’t ridden these woods in almost a year. Much had changed – many of the trails I had ridden were closed off in order to self-repair, and the new loop was pretty much the course Mark (Czysz, owner of North Carolina Motorsports Park and one of the best trail cutters you’ll ever find) put together for the summer VXCS race.

I probably shouldn’t have expected much, but this was pretty bad – I was stiff, hesitant, thinking too much…..and afraid of hurting my leg. The topper of it all was when I came to a small creek crossing. The bridge that is normally there was gone (washed away? who knows…) and in its place was a 2×6 plank. Normally I’d sail over something like this with nothing more than a minor line adjustment, but I hesitated, blew the line and ended up in the creek. No biggie, it wasn’t deep, but it took me maybe 10 minutes to get it out and get rolling again.

Despite all of it though, I could not get the smile off my face. Yes, I sucked out loud today, but it was only a few short months ago that I thought I’d never ride dirt again. In that context, this was one seriously awesome day.

Anyway, did a total of about 5 miles before heading back to the pits and loading up.

Got some more work to do. The forks are too stiff even on the softest settings and the carb jetting is way off. As for the rider, got some work to do there as well.

But it’s great to be back on the dirt again!

-Bob

Parts are in. Woo-hoo!

Parts are in, lots of work to do. Placed another order for the stuff I missed the first time around. Reinstalled the stock fork and shock springs in the meantime – the previous owner was heavier than me and had this thing sprung a bit too stiff for even my pizza-and-beer physique. These springs are, if anything, now a little too soft, but I’m working hard to lose some weight by the time of the first race; if I hit my target, they’ll be perfect.

-B

It Begins : Just Picked Up ’07 KTM 300XC-W

Found a KTM 300 on vchss.net. A 300 wasn’t even on my radar….no particular reason why it wasn’t, but I was looking mainly at 250 XCs and XC-Fs. Anyway, the bike was up in Virginia, so I asked a friend of mine to come along for the ride (always good to have backup when you’re meeting a stranger and have $3000 cash in your pocket).

The bike wasn’t terrible. This was the second owner; both he and the first owner were hare scramble racers and the bike had a distinct ‘rode hard and put up wet’ thing about it. All in all though, the asking price was very good even considering the money that would have to be put into it, and it came with a brand-new tag-still-on-it pipe, since the stocker was bashed all to hell.

So, deal was struck, we loaded the bike on the back of my truck and home we went.

Ordeded a bucket load of parts this evening, with any luck they’ll be in before next weekend so I can get it put together and see what it (and I) can do.

I did take it for a quick buzz up and down my street. Just about ripped my arms out of their sockets.

My first KTM.

Today, I am a man.

-Bob